Electrical Installation Designed Around How Your Property Is Actually Used
From a new socket or lighting circuit to rewiring, consumer unit upgrades and electrical work during a complete refurbishment, we help you understand what your property needs before deciding how much work should be carried out.
Spark Security Solutions provides electrical installation and upgrade services across Manchester and Greater Manchester for homes, landlords, HMO properties, offices and shops.
You Do Not Need to Know the Electrical Terminology
You may know that you need more sockets, better lighting, power for a new kitchen, an upgraded consumer unit or electrical work during a renovation — without knowing exactly which circuits or protective devices are required.
The electrical design should follow the property, the existing installation and how the space will actually be used.
We can assess the requirement first and explain the practical options before the project is defined.
Electrical Work From Small Additions to Major Property Upgrades
The right solution depends on what you want to achieve and what is already installed. Not every improvement requires a complete rewire.
Sockets & Switches
Additional sockets, replacement accessories, switches, USB-equipped outlets and electrical points positioned around how the room will be used.
Lighting Installation
Indoor, outdoor, LED, feature and practical lighting installations for homes and suitable workplace or retail environments.
Consumer Unit Upgrades
Assessment and replacement of consumer units where an upgrade is appropriate for the existing installation or planned electrical work.
New & Dedicated Circuits
New electrical circuits where equipment, room changes or property improvements require a suitable dedicated supply.
Full & Partial Rewiring
Replacement or alteration of wiring for older installations, renovations, extensions and properties undergoing significant changes.
Kitchen Electrical Work
Power, lighting and suitable circuits for kitchen renovations and fixed electrical equipment, planned around the final layout.
External Electrical Installation
Outdoor lighting and suitable external electrical points for residential and other appropriate properties.
Heating & Smart Controls
Electrical heating controls, thermostats and connected control infrastructure that can be incorporated into wider electrical work.
Renovations & Property Alterations
Electrical changes coordinated with extensions, loft conversions, room alterations, refurbishments and property improvement projects.
Residential, HMO, Office & Shop Electrical Work
We focus on property types where our electrical, security and building technology services work together effectively.
Homes
Electrical installations, upgrades, renovations and improvements for houses and residential properties.
Landlords
Electrical installation, remedial work and upgrades for residential rental properties.
HMO Properties
Electrical work coordinated around the practical requirements of shared accommodation and property management.
Offices
Sockets, lighting, power, networking and appropriate electrical alterations for office environments.
Shops
Electrical installation and alterations for suitable retail premises including lighting, power and supporting infrastructure.
Not Every Electrical Problem Needs the Same Solution
One of the most important decisions is determining how much of the existing installation actually needs to change.
Repair or Alter
Where the existing installation is suitable, a local repair or alteration may solve the problem without unnecessary replacement work.
Upgrade
Additional circuits, improved protection, new accessories, lighting or controls may modernise the property while retaining suitable parts of the existing installation.
Replace
Where wiring is unsuitable, deteriorated or the property is undergoing extensive alteration, partial or full replacement may provide the more practical long-term approach.
Why Electrical Planning Matters During Renovation
Advantages of Planning Early
- Sockets can be positioned around furniture and actual room use.
- Lighting can be planned around the finished space.
- Kitchen and fixed equipment supplies can be considered before installation.
- Data, Wi-Fi, CCTV and alarm infrastructure can be coordinated with electrical work.
- Future requirements can be considered before walls and ceilings are finished.
- Testing and documentation can form part of the project plan.
Things to Consider
- Rewiring and new circuits may require access to walls, floors and ceilings.
- Some work may require temporary interruption of electrical supplies.
- The condition of the existing installation can change the scope of work.
- Renovation schedules should allow electrical first-fix work before final finishes.
- The cheapest short-term option is not always the most practical during a major refurbishment.
- Final design should follow the real installation and intended use of the property.
Useful Technical Knowledge Without the Jargon
You do not need to become an electrician to make an informed decision, but understanding a few common terms can make quotations and recommendations much easier to follow.
Consumer Unit
The consumer unit distributes electricity to the property’s circuits and contains protective devices. Replacing it is an upgrade to this part of the installation — it is not the same thing as rewiring the property.
RCD Protection
An RCD is a protective device designed to disconnect the supply under certain earth-fault conditions. The protection arrangement depends on the design of the installation.
RCBO Protection
An RCBO combines residual-current and overcurrent protection for an individual circuit. This allows individual circuits to have their own combined protection.
SPD — Surge Protection
A Surge Protective Device is designed to limit certain transient overvoltages and can help reduce the risk of damage to sensitive electrical and electronic equipment.
Earthing & Bonding
Earthing and protective bonding form important parts of electrical safety. Their condition may need to be considered when altering or upgrading an existing installation.
Electrical Circuits
A property is divided into individual circuits serving different loads or areas. The existing installation and expected load need to be considered when planning additions.
Electrical Support Beyond a Single Installation Job
Rental and HMO properties can require a combination of electrical installation, inspection, remedial work and ongoing property improvements.
Spark Security Solutions can combine electrical work with related fire alarm, security and property-support services rather than treating every requirement as an isolated job.
Property Care & Management
For landlords requiring wider property support, Spark Security Estate provides the MANAGE side of the Spark network, while specialist electrical and security work remains supported by Spark Security Solutions.
Plan Electrical, Security & Connectivity Together
During renovation or property improvement work, planning related systems at the same time can avoid unnecessary duplication and make better use of accessible walls, ceilings and service routes.
Electrical • Protect • Manage • Supply
Spark Security Solutions
Electrical installation, electrical safety, security systems, networking and connected building technology.
Spark Security Estate
Property care and management support for landlords, HMO properties and managed properties.
Visit Estate →Spark Security Store
Electrical and security products supplied to trade customers and the public across the UK.
Visit Store →Common Questions
Do you only work in residential homes?
No. Our electrical installation work is focused on residential properties, landlords and HMO properties, together with suitable offices and shops. We do not position the business as a general industrial electrical contractor.
Can you install additional sockets and lighting?
Yes. Additional sockets, switches, lighting points and suitable circuits can be installed depending on the existing electrical installation and the requirements of the project.
Does an older property automatically need rewiring?
No. Property age alone does not determine whether a full rewire is required. The condition, design and suitability of the existing electrical installation need to be considered.
Is replacing a consumer unit the same as rewiring?
No. A consumer unit replacement changes the distribution and protective equipment at that part of the installation. Rewiring involves replacement or significant alteration of electrical wiring and circuits.
Can you carry out electrical work in HMO properties?
Yes. We can undertake electrical installation, alterations and remedial work in suitable HMO properties and coordinate this with related electrical testing and property requirements.
Do you undertake electrical work in offices and shops?
Yes. Our scope includes suitable office and shop electrical projects such as power, lighting, electrical alterations and supporting infrastructure. We do not market the company as a general industrial electrical contractor.
Can electrical work be planned with CCTV, alarms or networking?
Yes. This can be particularly useful during renovation because electrical, data and security infrastructure can be considered before walls, ceilings and finishes are completed.
Which areas do you cover?
Our primary electrical service area is Manchester and Greater Manchester, with selected projects also considered across the wider North West.
Electrical Installations Across Manchester & Greater Manchester
Spark Security Solutions provides electrical installation and upgrade services for homes, landlords, HMO properties, offices and shops throughout Manchester and the surrounding Greater Manchester boroughs.
Need an Electrician in Manchester?
Tell us what you want to change, what type of property you have and whether the work is part of a renovation or a standalone electrical project. We can then discuss the most appropriate next step.